The Research & Development Of System About The Optimization Of Aggregate Storage In Hydrotexhnics

There are a lot of situations where need many Aggregate Storage in Hydrotexhnics, particularly in long hydraulic tunnels. So we will face a lot of aggregate storages and mixer plants. We also face how to optimization of aggregate storage in many aggregate storages and mixers. Today, we are make this problem to how to optimization of aggregate storages in many aggregate storages and a mixer plant. The way is difficult to obtain the most economical way. There is few way to work the problem in our country. We need to find a good way to work the problem. The way not only can help we work out how to how to optimization of aggregate storages, but also can be used in the system that can help us to find the good answers in how to select aggregate storages. Firstly, this paper has analyzed the factor in how to optimization of aggregate storage in many aggregate storages and mixers and indicated the fall short of use of linear programming. This paper has analyzd the difficulty in we have deformation-analyzis linear programming to find the solution. The papers Also has analyzd the difference of "transportation problem"and the problem.Secondly, this paper has used the dynamic programming algorithm and linear programming to find a way to how to optimization of aggregate storage in many aggregate storages and mixers in three circses, The three cirses are "we need not graded aggregate", "we must graded aggregate"and "we couldn't know do or not". The papers use that way, not only made a flow chart to the way, but alse use it to a program. The program which has programmed by Visual Basic 6.0, can be used to find optimization of aggregate storage in many circses. It can help us calculating and analyzing the problem in find optimization of aggregate storage in Hydrotexhnics. The last. Paper show the result which is the programme has been used to work out how to optimization of aggregate storage in many aggregate storages and mixers in XinMa hydropower station and analyzed the difference in the program and the traditional ways. 　　Above all, during the research the process of how to provide of aggregate storages, paper bring forward "correlation-Aggregate Storage"And the paper give a way to become the complexity problem, how to use m aggregate storages to provide aggregate to n mixers and work out the answer. Paper partition the problem to in the "we need not graded aggregate", "we must graded aggregate"and "we couldn't know do or not"and use difference to work out the problem. During the calculateion of how to optimization of aggregate storage in many aggregate storages and mixers in XinMa hydropower station, we can find the ascendancy of the model and the System...