The Standardized Management And System Development Of Moetrological Verification

Measurement is an activity not only to achieve the uniform unit and insure the quantity value accurate and reliable, but also an important function of Quality and Technical Supervision Department. It is a working measured instrument used for the items listed in mandatory checking catalogue, such as trade settlement, safety protection, medical sanitation and environmental monitoring. The items that do not apply verification according to regulations or fail to pass through checking are allowed to be utilized. Meanwhile, metrological verification regulations must be carried out. National metrological verification regulations are established by the metrological administration under the State Department. Therefore, National metrological verification regulations should be a significant technical support for the successful development of mandatory metrological verification.Nowadays, owing to rapid development of metrological instruments, metrological verification regulations are usually failed to update in time. As a result, many verification methods of verification regulations are not in accordance with metrological characteristic of metrological instruments. Sometimes the methods even can not be carried out according to verification regulations of the project. Besides, problems such as the inappropriate parameter requirement for original verification regulations because of the improvement in the metrological instruments will also arise. This subject aims at the development the management system of metrological verification regulations and metrological verification regulations, in order to enhance the synchronization between verification regulations and existed metrological instruments.On the basis of the data collection carried out from the sampling point of metrological technical organization in Panyu District, the subject mainly explores how to better manage metrological verification regulations and actualize the dynamic of verification regulation management. Its emphasis is the establishment of standard methods of dynamic management combined with the review and revision of verification regulations. Further, the development of dynamic data collection system, and various dynamic data collection are carried out to help dynamic management of verification regulation. Finally the latest date in all walks of life can be collected in order to help enhancing the updating speed of verification regulation. So verification regulations can give better service to metrological verification and the traceability work of metrological instruments in different business. Verified by the repeated simulation experiments, the review/revision standard and management system of verification regulations can meet the practical requirement.