Copper Cathode Plate Flap Machine R & D Dynamics Simulation Analysis

The Turnover rig for 3T copper negative plate designed in this article in order to solve the difficult problem that the enterprise meet. The Turnover rig is widely applied in the steel volume,the copper plate production Workshop, fortransfering cathode copperplate from vertical to level.This issue studies special Turnover rig of the cathode copper-plate used by a Copper Corporation, on the basis of the equipment for the conditions characteristic ,and the existing problems in determining the Turnover rig to improve the design of indicators , the main problem to be solved, and that must be resolved in accordance with the main question, put forward a grooved wheel, Slider-driven crank grooved wheel, crank swing, as the Turnover rig drive system for the programme. Through the agencies of the movement and use of the characteristics of the analysis, comparison, grooved wheel is designed as a transmission system for the new structure Turnover rig. New structure of the Turnover rig, the parameters of its optimal design, simulation, that speed and acceleration curve, the board of the relative slip curve, as well as with the original structure of the shutter of the simulation contrast The results show that the new structure of the original solution Turnover rig-Turnover rig-existence difficult to control, smooth is poor, a board easy scattered problems. At the same time, the theory difficult to accurately calculate the force gear, Bopan sales for the round of contacts with the trough of the simulation analysis.Finally through the movement vice-place stress curve from the ADAMS software simulation outputs ,holds the plate girder and the rack body to the new Plate Turnorer carries on the finite element analysis, obtains its dynamic stress, the strain cloud chart, and proposed the improvement measure according to the analysis result. Then researches and develops the 3T Plate Turnorer, running steadily,and satisfies the actual production request.