Font Size: a A A

Research And Production Of Photoelectric Sludge Concentration Meter

Posted on:2012-09-23Degree:MasterType:Thesis
Country:ChinaCandidate:G WangFull Text:PDF
GTID:2211330368476086Subject:Traffic Information Engineering & Control
Abstract/Summary:PDF Full Text Request
The issue is based on the needs of wastewater treatment to design according to the sewage treatment plant project. As the sewage flows through the pipeline, there will be sludge precipitation, precipitation reaches a certain level in the time, it is possible to plug the pipe, causing accidents. Pipeline for real-time understanding of the situation precipitated sludge to avoid accidents, and for the development of a sewage treatment plant principles of real-time online using photoelectric detection of sludge concentration apparatus.In this paper, the principle of sludge concentration measurement, Lang Bo Bier's law is derived using the formula concentration, Concentrations obtained with the photoelectric detector receives only the current in the signal and use the method of parameter calibration, clearing the unknown constants, the final to calculate concentration of the formula. Sensor is based on the characteristics of the sludge itself, using near-infrared light-emitting diodes as a light source, using the internal amplifier OPT101 integrated photosensitive device as a detector to the design. Hardware which used multi-level amplification, filtering, voltage RMS calculation, analog-digital conversion and other modules on the sensor signals transmitted over the secondary treatment, we can get the voltage value that is associated with the concentration in the end. In software design, using C language to embedded programming, to overcome the disadvantage of low flexibility of assembly language and substantial increasing the efficiency in work. Finally, according to the voltage value from the hardware circuit and calculated by the current embedded software sludge concentration to display in the HMI interface.Through a number of experiments, the repeated change of hardware and the comparison of test results, the subject of the principle of using the photoelectric concentration meter designed sludge has been applied to stability such as sewage treatment plants and reliable operation and high precision.
Keywords/Search Tags:Photoelectric, Sludge Concentration Meter, Photoelectric Sensor
PDF Full Text Request
Related items