Sort Optimize The Design, Based On The Sliding The Sort Window Algorithm Aircraft

As an important national transportation, the civil aviation industry grows and the quantity of aircrafts increases rapidly under the support from the country since the foundation of China. The serious blocks happen when aircrafts taking off and landing influence the order of flight and flight safety passenger time and the benefit of airliners. The current main task for air traffic is to manage the conflict between air traffic service and the increasing flights.In pace with the fast development of national economy, the continuous increasing of general turnover leads the backward of airports with hard facilities and air traffic service. Meanwhile, the limited space makes the terminal ATC work passively which brings unnecessary burdens. One of the reasons for delay of flight is the old ATC system. However, compared with ATC system and airport facilities in advanced countries, China's hard and soft conditions place in a far behind position, to promote the service merely by using advanced equipment does not benefit. What we can do to satisfy the aviation development demand in the future is to make plan in both hard and soft facilities.So the paper quotes from a Sliding Sequencing Window, its characteristic is the calculation amount is not big, to avoid a lot of the bottleneck effect caused by the operation; The biggest advantage is that the algorithm is applicable to a large number of aircraft flight queue, generally in the cross of above; Also introduced cost function, make the balance all aspects. In the back of the articles of sliding Windows algorithm was verified the effectiveness of the, sort of the simulation analysis, the results show that this algorithm is used to optimize the sort of has a good effect. In this paper the final according to the method of software engineering, with object-oriented programming language C# of scheduling optimization algorithm design software, modular design scheme, divided into the plane parameters (estimated time of arrival, arrange the time after sliding window, sort of step length, adjusting range) data input module, the plane sort calculation module, the result shows that the output module. Finally after testing, using test tools according to the test plan and process the product function and performance test.