Modern mold design to the development of CAD/CAE/CAM integrated system,in the beginning of the mold design using CAE software for injection moldingsimulation analysis, the flow analysis, cool analysis and warpage analysis can beobtained as a result. On this foundation, modify the mould structure design once again,this design method not only saves time, energy, more important is to save a largeamount of cost.This article is on the based of the CAE analysis, design and manufacture a kindof cake cover injection mold, from the final forming results, CAE technology w asmore accurate. The works of this paper was listed as follow:1The finite element analysis was carried out on the injection molding processaccording to the requirements,and the flow analysis and warpage analysis wasobtained under the condition of initial parameters;2The initial parameters was optimized, the product model was changed, and theflow analysis and warpage analysis was obtained under the new scheme;3Referring to the analysis results of CAE, using three-dimensional modelingsoftware for the die structure of entity modeling and designing draw;4The mold was manufactured in accordance with the design of mould, and beinginstalled and debuged after finish the mould. |