The Body Form Analysis Of Men’s Private Parts And Research Of Dynamic Parameter For Three Areas Of China

Based on project resources and focused on the present research situation of the body form of men’s private parts in the garment domain, this paper portrayed the body form characteristic of men’s private parts in the three areas of our country, in order to offer scientific and accurate theory basis for garment pattern design. Therefore, this article proposed research thought- "Give priority to static state and pay proper attention to dynamical state", and followed the technical route named "the static build analysis is the core, and the dynamic parameter research is supplement", in order to objectively describe the bodily form characteristic of men’s private parts.The static parts used method of concluding theory from the whole to the part. Firstly, this article obtained more than 1000 samples with the aid of the measuring method integrating the direct way with indirect way. At the same time, this paper utilized mathematic statistic software, such as SPSS MATLAB, to carry on a series of mathematical analysis, eg. the mean value the correlation T-test k-means, and also to carry on the appraisal analysis to the statistical conclusion with the union of correlated specialized knowledge. Then, this paper obtained the whole tendency of the static body form character of three areas’ men’s private parts, and also reserved sufficient data file for setuping area database. Secondly, in order to reappear the body form character of the men’s private parts with direct-view, this article took the ZhongYuan area as an example, and used reversing project software Rapidform2004 to demonstrate the men’s static body form aged between 20 and 30 years old in the computer. Moreover, In order to adapt to the transformation of garment industry production mode, Namely the mass production changes into MTM, This article synthesized advantage and disadvantage of former build classification method to explore new build classification method in view of the men’s private part-comprehensive method of three targets, and subdivided the samples for three areas at the basis of the new classified method ,forming many small build samples. with the restriction of the sample number of three areas, the paper only selected nine typical builds(three for each area) as modeling object, and used stepwise regression as modeling method.The dynamic parts were launched based on the static analysis. First of all, this article selected grown-up men aged between 20 and 30 years old in the East China for the experimental object, and got the body surface change data of 30 samples for six movements. Secondly, In order to realize the supplement for the body form theory ,the research synthesized related mathematic knowledge to study the basic statistical analysis, grey correlation analysis and the grey model analysis to the dynamic data, and obtained the general trend of the main section’s surface change for the men’s private parts in order to provide the reference for the selection of garment loose.All in all, In order to manifest the character -"the static artistry and dynamic comfort of the garment are both important" -of the garment structure design theory, This article took the slightly fat-standard body form as an example, and established this build’s comprehensive model under the movement of lifting the leg up 15cm,which would offer certain reference value to the garment pattern optimization.