Design And Research Of The Key Components For Processing Equipment Of Pepper

Along with social progress, mechanized production gradually replaced manual work, play an increasingly important role in agricultural production. Pepper processing equipment is an important part of agriculture equipment, widely used in chili automated process, this article is designed to study pepper processing equipment in some of the key components, including a new mechanism to nuclear machine oriented design and pepper bake Dry optimize machine drying tank.Firstly, we introduce the design of directional transmission mechanism to chili pitter; According to both ends of the diameter thickness ranging from chili features designed one of the opposing roll roller, pepper slide down from the top of the course, the smaller end of the first through the roll bar drop, by thicker section later dropped, thus complete the process of falling order; fitted along the lower part of the roller, equipped with conveyor belt which axial conveyor, when the tip of first contact with pepper conveyor is the conveyor belt in the axial orientation of delivery and completion of chili sort. According to this principle, a three-dimensional model of directional transmission mechanism to explain its directional movement, and the key components to do a detailed mechanical analysis, including chili orientation during static and kinematic analysis.Secondly, according to the design of directional transmission mechanism, using SolidWorks software comes with its dynamic simulation plug-Motion analysis, the agency tilt angle, roll bar speed and draft angles and pepper and roll bar between the friction coefficient of pepper orientation success rate When directional effects, and get institutional inclination angle 9°-10°, roller draft angle 1.1°, the roller speed of 120 rpm, roller and pepper dynamic friction coefficient of 0.05-0.07 high success rate, at the same time, output Belt speed greater than the speed of chili contact with the belt when the control in 1500mm/s or so.Then, a brief analysis of the whole structure of pepper to nuclear machine will go to various parts of the establishment of good chili core machine assembly and describes the working process of the machine, introduced the whole cohesion and collaboration with various agencies in the course of their work. Theoretical analysis of overall operating efficiency. Pepper to nuclear machine by machine mechanism analysis, completed the overall design.Finally, an important component of chili drying me drying equipment to optimize the structure, three-dimensional solid model by drying box, using the Workbench software simulation of the flow field in air drying equipment, temperature, flow rates, results in drying Add two of the total dry inside the box high half the height of the convex plate and a downward bias at 60° angle through the hot air drying is best.