The Design And Analysis Of High-rise Frame-Shear Wall Structure Building

With the rapid development of our country’s economy, the further deepening ofurbanization. Big cities for talent to attract more and more big, people also more andmore yearn for city life, this leads to the increasing of urban population, relative to theproportion of per capita resources less and less, directly led to the development of thehigh-rise building.Faced with the challenge of tall and super-tall structures, people in constantresearch how to get more and more space, and all kinds of structure arises at the historicmoment, the structure form of research, the traditional masonry structure system andordinary concrete structure system has been insufficient in aspects such as constructionand space layout, the high-level structure form, mainly has the following several forms:frame structure, frame-shear wall structure and shear wall structure, etc., in addition tohigh-rise structure, but also has frame-tube structure and tube structure, etc.Modern architecture design, due to its complexity is higher and higher, fullymanual calculation is not possible, the resulting flow of engineering design softwareprovides us with great convenience. And software analysis help us to solve the hand canhardly achieve some of the problems. Finite element method (fem) is used in this paper,the main design method and implementation by SATWE and TAT software.Structure design to the concept of structure design in the first place, through theconcept design for the design of the project to conduct a comprehensive control. Thispaper is the most common in the city of frame-shear wall structure, combined with theanalysis of the actual project, through the computer design software, from establishingthe structural model to the data input and the output of the final data, then analyzes themain data output, under the condition of meet the specification, the actual feasibilityanalysis was carried out on the calculation of output data.