The Design And Research Of The Flat Press Of Tea Leaves

At present,China's tea production sector pure manual and half mechanization processing is given priority to,the low production efficiency,the complex process,high cost,quality problems such as instability,investigate its root causes,and lies in the machining process,artificial factors.Therefore,in order to solve the above problems,this paper design a continuous automatic tea flattening machine,and to study its key components,the device can not only meet the requirements of the tea processing technology,and can realize continuous production.In this article,through the tea to manage to achieve the desired effect,after a squashed to test main physical properties parameters of tea,for subsequent validation of the prototype.According to the existing tea processing machinery,design a continuous bedding article the overall scheme of the flattening machine,the device by the process control system,automatic machine,automatic cloth cars and automatic pressure machine of the four modules.Article follows this article mainly discusses the automatic machine,automatic car cloth and flattening machine to carry on the design and calculation principle of the machine U pan tank,main parts such as crank rod system,in contrast to a machine that is commonly used in heating device and linear guide,select the appropriate heating device and linear guide.In the design of flat press,the main parts such as frame,drum frame,moving frame,roller,etc.In the design of automatic fabric car,the size and speed of the car are analyzed.The overall data of the fabric car is the length of the cloth car: 1500mmCloth car load: greater than 50 kg of fabric width: the height of cloth: the speed of the cloth:The effect of the different inputs on the flattening of the strips is determined by the sample machine test of the slip-on press,and the optimum input quantity is 2.0 kg.