| The architectural engineering construction quality acceptance standard(GB50300-2013)and the matched the acceptance specification since the years since,the ascension of overall quality of construction works played a great role in promoting.Division division,breakdown,as the important content of construction quality acceptance system,how to reasonably to played a key role for the engineering quality acceptance.Division division,the more reasonable component partition,the quality acceptance system more scientific,the better the quality acceptance level,construction quality acceptance of the stronger the maneuverability,acceptance conclusion is more reliable,therefore,research on this topic has very important significance,the main content of this paper are as follows;First,this paper introduces the research on partial engineering division of the purpose and significance,the development present situation at home and abroad,in the European and American countries,for example;Secondly,the thesis according to the architectural engineering construction quality acceptance standard "(GB50300-2013)and" the construction engineering construction quality acceptance standard "(GB50300-2001),comparative analysis and research,(hereinafter referred to as" new standard "and" old specification "),the "new norm" and "old code" in the content and structure form of the difference,based on the research of the revised specification and evolution,forming has a deep understanding of the specification,optimize the division division,component classification and perfecting an insight into the hold.As the architectural engineering construction quality acceptance standard system in recent years gradually improve and development of new and old specifications have changed dramatically in the content,add the new partial foundation projects,the main structure engineering partial and partial architectural decoration project acceptance,acceptance of administrative levels feeling and strong maneuverability,at the same time,the unit engineering,branch and sub branch engineering,points again work and inspection of test,the efficiency will also have a certain degree of ascension.Finally,the "old code" in the accounts for the deficiencies in the use process,and puts forward opinions and Suggestions on disadvantages.In the third part of the paper,introduces the "old code" in the defects that exist in the process of using,for example.To not clear,the classification of inspection lot acceptance of the sectional works exist leak and inspection batch test specification is incomplete and so on questions;Puts forward the necessity and urgency of partial engineering division,this article mainly isfoundation of partial division,the division of the main structure partial and building decoration(wall)partial division,after the partial division of construction works,improves the quality and effect of acceptance,improving the system of construction engineering construction quality acceptance specification.Finally,the concept is the theoretical part,through specific engineering case to demonstrate and explain,article 110 kv substation main building at the center of the ma an camphor completion quality inspection,for example,is the main factory building foundation division of engineering division,the project is located in the west ever mountain huangshan in anhui province huangshan city museum between beads in the pond,into the open.Engineering design of a total size of 3 x 50 mva,current construction of size2 x 50 mva the main body structure engineering,construction decoration division,engineering division to improve the overall quality of the project produced positive influence.At the same time,for the building engineering construction quality acceptance provides a good reference,indeed through the division of the branch of engineering and optimization to improve the effect of the construction project acceptance,improve the quality of the construction project,and the conclusion of the article made a summary. |
PDF Full Text Request