Taiyuan The Operation Condition Of The Heat Source System Analysis And Determine The Best Solution

With the continuous expansion of city,district heating system is becoming more and more complex,for a large network of different types of heat source is widespread,and many large and medium-sized urban central heating operation also gradually to the heat source model of economic operation of the joint development.More heat source networking operation system compared with single heat source alone the network operating system optimization scheduling can improve the heat stability and heat source,such as according to the order or mediation heat output of heat efficiency,greatly improve the economic benefit of running.Second heat pipe network more compared with single heat source system,special hydraulic intersection point is the heat source,as the change of heat source hydraulic intersection of position shift will happen,so the heat load shall be adjusted accordingly to adapt to the change of the hydraulic conditions.In view of the above characteristic,so this paper takes Tai Yuan network as the research object,put forward the analysis method of heat source connected to the Internet technology:1.Heat source open time determined by the analysis of the heat load and run length;2.Through economic analysis to determine the different forms of heat source provided by the load properties;3.Through hydraulic calculation and drawing pressure diagram for hydraulic balance,for optimal design of heating pipe network and multiple heat source connected to the operation scheduling provides guidance;4.The computer monitoring and control system and energy analysis software in a multiple heat source network running the application and prospect.Hope to establish a set of reasonable analysis through scientific and reasonable means more heat source connected to the technology and methods.