Research On Multi-state Integrated Online Monitoring System Of Cable Channel

Cable and its channel status more comprehensive online monitoring system of continuous acquisition cable and channels in all kinds of operation status information and control of wellhead,lighting equipment,such as opening and closing.The system integrated the function of all kinds of monitoring,compared with a single monitor,function more perfect,more efficient.Not only can satisfy the cable equipment and the channel operations regularly patrol requirement,at the same time,through continuous monitoring can find cable channels of various abnormal state at any time,can find anomaly in the first place and call the police,to eliminate hidden dangers in time,avoid the happening of safety accidents[1].By online monitoring and control system,the integrated cable operations staff can don’t have to go to the site can get the result of the previous site supervising,and through the system to collect data to data from the field is more comprehensive than man,greatly saves the manpower and raise the efficiency of equipment information collection.Because don’t have to ditch under operations staff(tunnel),also avoid the operations staff safety accidents.The construction of the system also can effectively avoid cable channels of safety accidents,ensure the cable in the cable channels and the safe operation of the equipment,and thus improve the security of the whole power supply.System in the continuous monitoring of cable and channel equipment data accumulated at the same time,through the analysis of the device for data to set up the equipment operational strategy plays a role of data to support.By using the system,can greatly improve the level of urban power grid security,so as to improve the production efficiency of the power supply unit.And with the development of smart grid,the online monitoring is the future for power supply enterprise management an important means of cable channels[2].Based on the extensive investigation and research the current management status of power supply enterprise to cable channels on the basis of,again through the combination with practical engineering,the patrol cycle around the cable channels operational requirements and the actual situation of patrol content and some key technology in the integrated online monitoring system engineering and implementation plan for design.According to the requirements of design and implementation of the cable channels for the installation of monitoring equipment for the construction project of changing the main body of cable and channel condition monitoring objects,linkage device control scheme of the channel,and channel data information system planning objectives.Core technology in the course of the construction of the decomposition and reconstruction scheme for the detailed design,and combined with considering the necessity and feasibility of the implementation of the scheme,and validated by actual case.Through the practical engineering inspection,cable channels more status,integrated online monitoring system after the implementation of the project,fully effective control of cable and channel running state,can immediately find the exception and alarm,avoid the happening of the accident,at the same time through uninterrupted monitoring can effectively run data accumulation,reaction equipment operation rule.Using this system can greatly save resources and reduce the channel and cable equipment failure rate,at the same time to provide data support for cable equipment operations,can effectively improve the operational management level of cable channels,raise the safety level of the power grid[3].