| Liquid steel slag treatment,is a production process in steel smelting production that the temperature of liquid steel slag from high to low of normal,which could create convenient conditions for subsequent processing and reuse.Liquid steel slag treatment by rotary cylinder can get good effect at for liquid steel slag and has some other advantages such as better environmental protection,less area of facilities covers,low investment,high efficiency,easier reuse to separation and processing,and so on.But at present,liquid steel slag treatment by rotary cylinder is still limited to process some carbon steel slag.How to realize processing all kinds of steel slag such as stainless steel slag and carbon steel or both they are,to increase the productive efficiency of the liquid steel slag treatment system by rotary cylinder,the technical meaning and social meaning is very profound.However,liquid steel slag processing are quite dangerous and complexity,has a high requirement to all aspects of the whole production processing system.In order to improve the raw material applicable ability of liquid steel slag treatment by rotary cylinder,we need to conduct a comprehensive technical transformation to the whole production system.Equipment modification is one of the main content of the technical transformation.That is because the raw material applicable ability improvement relies mainly on its core equipment processing capacity increase,which could offer hardware conditions to improve robustness and working environment at the same time.In addition,we also should provide some software upgrades to the production system range from process improvement,raw material selection,skills,environment improvement and so on.The study of this article take the liquid steel slag treatment system by rotary cylinder as the research subject,in order to improve the raw material applicable ability of the production system.Based on the related theory knowledge of the production system,technical transformation,stable management,risk management and control,through analysis of the production system,making its improvement plan,and analysis and discussion to all kinds of risks existing in the process of the plan,the study research and develop a set of production stabilization management solution.The improvement of the liquid steel slag treatment system by rotary cylinder is a sub-project of steel slag processing production system improvement.The experience range from the production system improvement,trial production plan making and its risk control to stable management,could well apply to the other liquid steel slag treatment system improvement project,especially for the new stainless steel slag treatment system project,that has strong guiding significance.At the same time,that can also play a positive role in the field management improvement,reducing trial production time,etc.,. |
PDF Full Text Request