| In recent years,along with the Internet technology application level of rapid ascension,WIFI wireless network communication technology is more and more be known.For the current rapid popularization and development of the Internet around the world,people’s work,study,life and other aspects are dependent on the Internet,and the growing reliance on the Internet.Based on WIFI wireless network communication technology of grounding wire status information collecting device is based on GSM/GPRS communication network,receive information to check the device to hang ground bases of job information image data,GPS data and job site,controlled by controller TMS320F2812,upload the data through the WIFI network to the computer terminal.This article based on the actual operation,to develop a set of based on WIFI wireless network communication technology of the grounding line job status information receiver,can replace the traditional serial port or USB transmission,to solve the device is currently existing wiring poor flexibility and low data transmission rate,data cannot be Shared etc.The device receives the grounding wire from the monitoring device of ground operation status data,at the same time,maintain real-time communication with computer the background management software,upload the run data to computer terminal,convenience of management is centralized management,improve work efficiency,to actualize digital and information-based grounding line operation network.This article developed device with TMS320F2812 as the core processor,combined with the power supply module,liquid crystal display module,MAX3232 serial interface module,GSM/GPRS communication module,WIFI communication module and so on to form the device hardware.Through the s tudy algorithm and implements a grounding line job information,effective receive image data and GPS data,implements the application WIFI wireless network communication technology makes convenient and efficient data transmission and sharing. |