Research And Simulation Of New Hydraulic Tyre-Curing Machine

At present, tyre shaping and curing press has two types: mechanical tyre shaping and curing press and hydraulic tyre shaping and curing press. With compares of mechanical tyre shaping and curing press, hydraulic tyre shaping and curing press is more superior, and it will replace the traditional mechanical shaping and curing press in future. Currently the development of hydraulic shaping and curing press is still in the start stage in civil, so it is necessary to develop and research hydraulic shaping and curing press. This new hydraulic tyre shaping and curing press is manufactured according to the requirment.This topic belongs to the item for science and technology of Shandong province. With the success of machine it will be expanded and applyed gradually, and it will obtain good economic and social benefit necessarily.According to the analysis and comparison of tyre-curing machine existing, a new type of hydraulic curing press was designed in the paper. The main work of this dissertation is as follows:1. Determining the whole project of the new hydraulic tyre shaping and curing press, the project includes technique characteristics, components and craft process of the machine.2. The mold open-closed device and pressing device were studid emphatically. The shoulder pole type was used to open and close the mold and a slide cylinder was used to press the mold when the tyre was cured.3. The CAD technology was applied successfully. The parametic software—UG was used to mold and assembly the main part of this machine.4. The CAE technology was applied successfully too. The mainly parts of this...