Three-dimensional Model And Design Of Sample Of New-style Three-disk-cycloid-driving

The parametrization three-dimensional construction drawing and engineering drawing of new-style three-disk-cycloid-driving were established on the basis of the precise force analysis and optimization design of the parameters of new-style three-disk-cycloid-driving;the design and experimental verification of SFA45-59.Based on the conventional cycloid gear force analysis,a force analysis theory which can apply to new-style three-disk-cycloid-driving was produced and an accurate force analysis mathematics model of the new-style drive was established. The CAD software of force analysis was programmed and the precise age limit of arm bearing was calculated.Based on the existing theoretical research,SFA45-59 conventional type three-disk-cycloid-reducer was designed and its main parameters were determined. Three-dimensional model of sample was established with the Pro/E engineering software.The experiment of trial product is conducted after the SFA45-59 was produced. It showed that the drive efficiency of trial product exceeded 75% domestic excellent sample and achieved 80% transfer efficiency of Japonic FA drive sample.All series of three-dimensional models of three-disk-cycloid-driving were established by Pro/E and automatic assembly of components was realized by Pro/TOOLKIT. The engineering gallery of new-style three-disk-cycloid-driving was established by ObjectARX of AutoCAD2000.