Planning And Design For Water Comprehensive Practice Base In School

Since China's Ministry of Education clearly stated goal of talent of Vocational Education and Training, vocational education paid more and more attentions to practical and operational capability. For the proposal for the integration of working and study, the current effective approach is to build a practicing and training base, and gradually realize the integration with the community.In the process of building the new campus, it's possible to build the practicing and training base. The article makes an analysis of the construction from functional requirement, economical and technically feasible. It shows that there was not only feasibility, but also necessity to build a practicing and training base. According to the actual state of planning area, together with practice base of other institutions and the requirements on the project form components of the school, develop an effective plan design by a comprehensive analysis, accurate positioning, rational planning,.Results of the project mainly serve for schools, teachers and students, so we should listen to school administrators, educational departments and related professional students'comments and suggestions. In the process of opinions collecting, we use brainstorming, questionnaires, group interviews and other means to get a lot of valuable information. It provided good material and conditions for student internships and teacher research.Control of investment makes an important affect during the study stage of the project feasibility. So we should control investment well during this stage. To do it well, we should determine the scientific basis for the preparation of the investment estimates. To estimated investment cost of doing the calculation of the major is also very important. Break down the project. Allocate the resources rational. Control the investment well. To control unreasonable changes of each profession, we use limit design, so that the professional investment limits by the distribution of control design. Limit through the layers of design, we realize the control and management of investment quotas to ensure that the total amount of investment is not a breakthrough.In order to get good quality construction and achieve the expectations of investors, we should do scientific advice, well-designed, good construction and quality management. But the quality management during the early stage work is often ignored. Design, technical solutions and design drawings have been identified during the Implementation phase. We should pay much attention to the quality management during the design phase. Doing market research, comparing technology programs and equipment selection are all good ways. We can make the project management responsibility on quality, development a project quality plan, establishment an advisory review of the quality system. Make quality management for the project in the early stages of the project in order to provide the best design.The project makes full use of geographic resources to solve training and practice for students of the water conservancy, irrigation, hydrology and water resources and other related professions. The program insists in ecological principles. Protection of the natural mountain areas, rivers, forests, etc. to protect the original ecological environment mainly adopts the strategy. At he same times, we take full advantage of the existing natural topography. According to the teaching needs, build the appropriate facilities aimed to improve the functional layout and create a modern eco-campus with water features. Hydraulic model materialized is first pointed out in the paper. Make use of favorable terrain to do the construction and achieve its role in water movement. A lot of clean energy new technology and new materials are used in the project. Through analysis and comparison, this program is the best. I hope it'll be fully realized in the planning area."Management is also a productive force", management plays an important role in the project. In the investment decisions and project design stage, it's important to control investment, progress and quality well. It's useful to optimize decision-making on the project and make high-quality design. So we should control well on this stage. According to the functions and spatial organization, we make a sub-module design and point out the key elements to control in order to carry out the project smoothly.