| At present, the class of the yam and other root neck fruits and vegetables, domestic is still not mature in automatic peeling equipment. More popular peeling machine on the market is much for hair roller peeling machine, peeling after there are a large number of yam surface scratch, product extremely beautiful; And will waste a lot of water, but also need to configure the drainage facilities; Unable to meet the needs of today’s society green production.To this end, this paper designs a kind of automatic peeling machine and peeling method; It includes transmitting device(with card slot belt device with chain transmission device), the material car, having a clamping mechanism, peeling device, the material car installation in the chain transmission device, follow the chain operation cycle plant; Cardiovascular and clamping mechanism and peeling device fixed on the rack, located above the material car, the material car run cycle, in turn, after having a clamping mechanism and peeling device; From line up at the next higher level has been completed by the inlet section of the root-stock material falling into the central clamping mechanism, the material car through the clamping thimble clamping materials, materials transported into the paring knives groups to peel, peel will be out of the materials, and after the completion of material in the proper position falls to discharge conveyor belt and sent out. The device is controlled by PLC system, automatic peeling device cycle under normal conditions; Accident happens PLC output signal enable the belt conveyer stop waiting, until the car the yam off the plate, subsequent yam continue delivery, peeling device loop operation. The design significantly increased yield, reduced the water consumption, the product is beautiful, the operation security environmental protection, fully implement the root-stock automatic peeling, the machine has simple structure, high stability, suitable for assembly line mass production completely. |
PDF Full Text Request