Wuxi City, Measurement And Testing Center Laboratory Testing Process Quality Control Applications

The traditional lab management mode has come through essential changes with the improvement of the socialistic market economy. Especially the fact that the clients choose the mode of tracing to the source and the reliable lab by their owns makes the lab open to the market, put the clients' demands in the center of the work, strengthen the modern serving concepts, professional in serving actions, build up good serving examples and promote the serving quality.According to the international universal standards ISO/TEC guide line 17025 "the Normal Requirement for the ability of the measurement and calibration lab", Wuxi Measurement and Testing Center carries out the "quality first" tenet completely, uphold the testing work to make it scientific, equal and authoritative, ensure the measure units uniform and testing data correct and credible. She points out that the core task of quality management is to make sure the testing and calibration data supplied by the certificate or the report correct, reliable, complete and timely and fulfill the promise of good testing and calibration quality to the clients.This article studies on the quality management system of Wuxi Measurement and Testing Center mainly from two aspects which include quality control of lab testing process and uncertainty estimate. It gets the knowledge that ISO/TEC17025 is only the normal and basic requirement to lab ability, not the upmost requirement and should never be copied and used with little change. We should use the ISO/IEC17025 rule flexibly to build up our special quality management system according to its own character to satisfy the all-aspect requirement, to suit one's own job and to make sure the quality management system suitable and effective. She operates the quality management to realize thorough and complete control and enhance the measurement and testing service quality by setting and improving the lab quality management system.