The Improvement Research Of LY Company's Production Line Balancing Base On The Theory Of IE

The rapid development of manufacturing industry, not only promoted the development of state economy, and drive the other industry development. With the progress of The Times, manufacturing enterprise production pattern changed, today's manufacturing used more production line mode of production mode, this way of the whole product production process for subdivision, assigned to each work such a process is fixed limited, and that every work only need to master a certain a few procedure, the overall look, simplify the production process, and can improve the operation of each work a speed. But the distribution methods often ignore every work of a time of operation consistency, such not only caused unnecessary loss of working hours, also easy to cause a large amount of deposit sluggish product appear, serious can have even production terminated, finally affect the balance of production rate and the production efficiency. So in production line production mode, how to improve the efficiency of the whole production line and productivity, lower production beat, streamline work personnel and equipment, reduce process in between the products, and the pursuit of synchronization production mode by more and more many manufacturing enterprise value.This thesis LY wood industry company the balance of production line, and combined with the company product characteristics, current production line to improve and optimize, and put forward corresponding solutions, to improve the efficiency of the production of the enterprise that industrial engineering theory and technology in the actual production line balancing the use of the improvement. First of all, the paper describes the industrial engineering theory of production line balancing improve involves the related theory and production line of the evaluation index, and expounds the influence factors of production line balancing, and puts forward the improvement of production line balancing direction; Next to the production line balancing LY wood industry company of the field investigation and analysis, this paper through the process analysis, procedure analysis method to determine the company the production technique, production process and production line location distribution; Then the work measurement method of scientific calculated each procedure of standard time, again through the evaluation indexes of production line to reflect the actual operation efficiency production line; Finally pointed proposed specific, reasonable way of improvement, and improve the balance of production line after contrast ratio, so as to show that, through improving promotes, to some degree, the company production line balancing rate; Summarize the effect of improving and the reason, and to improve the effect after the evaluation of the late put forward improving key.