The Virtual Design Of Cutting Machine About Disk Copper Pipe

Disk Copper pipe cutting is the first step in process of parts made of copper,high efficiencycutting machine can improve manufacturers production efficiency.The high-quality cuttingmethod for manufacturers to reduce cutting waste to reduce the time of cutting.Becoming moreand more thin-walled, small diameter of copper pipe are applications in the air conditioningindustry and other industries brass. So copper pipe,s cutting process is prone to cause cut off theuneven deformation, face and burrs and other defects.First of all. analysis influencing factors of rollling shear and theoretical force about rollingshear, Verify the feasibility about useing rolling shear to cut off low hardness and thin-walledcopper pipe, analysis or decomposition the the working principle and the implementingagencies of disk copper pipe cutting machine by useing innovative design theories andmethods. Design the overall structure of every function Device. Carried on vibration analysisabout Cut-off device To avoid the occurrence of resonance and as a design reference. And thenapply the virtual three-dimensional computer-aided design software(Pro/E) parts of the modeland design,combined with the bottom down and bottom-up two models design method,The useof Pro/E solid modeling design parts three-dimensional virtual model design. Followed bycarry on the virtual model assembly simulation analysis, Static virtual assembly simulation thatthe design of the various components the reasonable assembly simulations and verify parts ofthe structure and size of the design, Repeatedly modify the design parts of the structureimproper size. Make sure of the Cut machine,s host overall structure and size of the rationalityof design.Simulation of reality prototype assembly process, Predict the various problems in theassembly process of the actual prototype,Reverse the disassembly process simulation, Analysisof disk material the brass cutter assembly feasibility and Assembly path optimization.Onceagain, the assembly overall static interference test,Verification to ensure the correctness of thewhole assembly is completed. Rotating roller honestly off the stability of the process is toensure that cutting cut off the key to the quality, In order to ensure the stability of the cuttingprocess, The rotating roller honestly off the virtual prototype of the device dynamics simulationanalysis, Simulation of the acceleration of the the rolling shear brass process of feed, feed speed,feed device of the force and depth of cut, as the rolling the shear rotation speed and rolling shearto optimize the design of reference, Obtain a reasonable size of the rotating roll-cutting speedand feed thrust.