The Design Of Non-avoidance Dimensional Garage

Available on the market combined with mechanical parking equipment, on the basis of simple lifting parking equipment on demand made no avoidance. Select the exercise program, carried out on non-avoidance parking structure and control system design. Selection of sports programs for walking, turning, lifting. Move the box and using a motor-driven running board running along the rail car load direction, rotating column and upload mechanism driving the car plate is rotated by 90 degrees, lifting mechanism driving the trolley plate movements. No access to car parking garage avoidance is the process by walking, turning, up from a combination of motion to avoid the bottom of the composition of the vehicle and carrier plate on the car park below. In mechanical design, the main design of the rail base, walking tank, Rotary, columns, lifting mechanism, load the car plate. The control system uses Mitsubishi FX1N-40MR PLC as a master device, adding photoelectric switches, inverters, encoders, limit switches, relays and other components, is mainly used for walking, turning, lifting three movements, and is provided with fall protection and other security features and remote control modules convenient and safe to use. Simultaneously intelligent control of the whole control system through the appropriate software program. Finally, the mechanical structure and control system for debugging, meet the requirements. This paper has studied the development of three-dimensional garage simple, low cost, easy to install and so on. Ideal for renovation and expansion of the old garage.