Design And Implementation Of Distribution Room Network Monitoring System Based On Embedded Web Server

Due to the rapid economic growth and a significant improvement of people’s living standards, requirement for stability electrical energy supply is increasing, as the end of the power grid, the normal operation of the distribution chamber is also becoming more and more important. In order to ensure the safety operation of the power distribution room, power distribution room is needed to run a full range of environmental parameters in real-time on-site monitoring, such as temperature, humidity, fire, smoke, flooding, infrared intrusion;Related equipment are also needed to control the power distribution room, such as lighting, exhaust fan.However, the traditional manual duty management mode will waste a lot of manpower, material and financial resources.How to monitor and control the environment of power distribution room in real time, high efficiency and stability is worth studying.This thesis provides a B/S monitoring program based on Embedded Web server, discuss and implement the hardware architecture and software architecture of the Embedded Web server. In any browser and Yeelink things common platform,you can remotely browse the real-time acquisition of distribution room environment and control related equipment of the power distribution room, form a data transmission channel with the existing Internet and the Internet of things, realize a real-time and efficient monitoring system for power distribution room. Considering that in the specific industrial application, the real-time requirements are relatively high, this thesis adopts the WebSocket protocol in HTML5, and the final realization of the real-time display of the data acquisition.In addition, not all browsers support WebSocket protocol. This in fully into account when implementing the system, determine the customer’s browser at first step, if they do not support the WebSocket protocol,take Ajax. Dual-protocol stack, real-time monitoring, which is the innovation of this thesis.Research work in this thesis is to build the Embedded Web Server for monitoring, developed a set of Web Server monitoring platform based on microcontroller, it is convenient to build, low cost, platform-independent and good interactive, can make up for the shortcomings of the traditional monitoring systems, and for the further development and expansion. The research results of this study, a higher real-time requirements for application scenarios, with some reference. The research results of this thesis have some reference value for the application of a higher real-time requirements.