Research On The Path Of Coordination Between Cities And Industries: Case Study On Tianfu New Urban District

At present, domestic and industrial zones in the city planning andconstruction in the city produced widespread separation of duty live imbalance.This phenomenon has seriously affected the development of the city. In thisthesis, combined with Tianfu New Area planning, based on job housing balanceconcept is presented in hierarchical connotation of the city on the basis of inunits to build cities, and proposed the concept of unit production integration ofthe city. Based on the connotation of staff live in balance, on the new urbanresidents travel time, travel distance calculations and based on the maximumtravel distance and travel mode composition ratio reached different scales andurban road network structure and appropriateness of the largest scale, whichgives measure unit scale reference standard. Scale production city integrationunit15-45million people, is the scale of medium and small cities. Integration ofthe city is not a single production unit urban residential areas or industrial zonesconcept, but inside the unit complete coverage of production, productionsupport, housing, housing supporting the four urban functions, and according tothe dominant function unit have different functions in different ratio.In order to enhance the integration of the city unit of productionapplication, thesis "TianfuChuangxinNew innovative R&D industry, functionalarea Jiancha unit controlling detailed planning" and "TianfuChengMeiNewinnovative R&D industry, functional area Puxin Jinhua unit controllingdetailed planning" as the basis, specifically addressed the integration of the cityunit of the specific production practices. This practice prepared with thetraditional idea of different regulatory control is a top-down holistic ideas,put forward a framework for the preparation of regulatory control. First, theoverall level of consideration from the city, according to the size of the totalurban population, to determine the function of supporting the city level;combination then take the idea of the city, the cities divide into several units,each unit is independent of the city, complete with its own system of urbanfunctions, in accordance with the size of a small city to arrange the appropriatescale matching function; in turn subdivided into a number of units functional zones, similar to the traditional regulatory control in the neighborhood unit.Function cell consists of grass-roots communities, with the most basiccommunity services. This idea is more suitable for the preparation of the city’slarge area of regulatory control preparation, especially the preparation ofregulatory control of Metro. Integration of the city due to capacity ratio andfunctional units on land complete with appropriate standards, therebyfacilitating land constitutes reasonable conduct on arrangements to prevent aparticular land imbalance caused due to waste or missing features, but also toavoid the new city evolved into industrial areas of the state. In addition, therational function of supporting standards and the planned size of the populationcontrol helps in determining regulatory control indicators, such as floor arearatio, building density, green rate, making the regulatory control of each Area ofthe establishment, have done justified, data. So this frame planning conceptscontribute to the control of the preparation of regulatory control in the planningreview can also have a corresponding reference standard, to bring operationalplanning review and theoretical support.Finally, in order to meet the needs of job housing balance, on the Jianchaunit and Puxin Jinhua unit control regulations for the preparation of the stafflive in balance calculation and check of concrete. The results show that thecell-based estimates of population size have a strong rationality.