Application Of Group Technology In Instrument Parts

At present,kinds of instrumentation products YD corporation have undertook are various,the production forms of which are mostly multi-species,small batch.Development and production of parts by model、batch preparation process production and production scheduling scheduling,not fully taking the similarity of the components of different types of parts and the components of the sub-systems into consideration.Therefore,the production cycle is long,the processing efficiency is low,the works of preparation production planning and organization are heavy,the management is complex,which has not meet the low-cost,high-quality,efficient and rapid response to mass production requirements.With the group technology and computer-aided technology,multi-species,small batch production model can be transformed into mass production mode,thereby greatly improving labor productivity,shortening the production cycle has become possible.According to this demand,the studies on the production and application of group technology has been carried out on instrument parts,and the method of group classification suitable for instrument enterprises has been worked out to ensure the successful completion of production tasks in multi-models and multi-states.The study on grouping technology is carried out in the aspects of parts classification,process preparation,tool design,production preparation and production application.On the basis of the above,the following studies were further completed:the design of typical parts grouping process specification,the design of typical machine tool equipment group,the application of group production management,and so on.Finally,the application of typical shell parts Group production process for production and application validation.After study and verification,the application of group technology in the production of instrument parts can effectively reduce the workload and time of production preparation.The types of process and the number of process equipment can be greatly reduced,and the productivity and processing quality of the parts can be effectively improved.The cycle can be greatly reduced,the production cost is effectively reduced.