Environmental Risk Assessment Method Build Up And Application In Semiconductor Industry

Based on the rapid development of the semiconductor industry,this paper mainly introduce how to build up a environmental risk assessment method suitable for semiconductor industry on the basics of the corporate environmental risk assessment guide by environmental protection central office in 2014.The Q · M · E Method of environmental risk assessment focus on 3 aspects of environmental risk material quantity in the factory(Q),production technology and environmental risk control level(M),environmental risk sensitivity(E)in the semiconductor industry and developing environmental risk grade partition table.Identified sensitive targets,pollution emissions under normal production conditions and abnormal production conditions,dangerous chemicals as top 3 major risk source.Thus develop risk management strategy of semiconductor companies in the environmental protection.The risk control measures are described from site selection and design specification for semiconductor companies,dangerous chemicals managing,construction and operation risk management,environmental risk prevention and emergency response control measures are described from emergency planning,emergency resources,emergency intergraded system and the upgrading of emergency management.Emphasis on "base" + "innovation" mode,"base" by the implementation of the implementation,while the "innovation" is use of large data,advanced strain equipment,etc..Finally,applied the Q · M · E Method of environmental risk assessment methods into S Semiconductor Company.The assessment result of S company is "high risk”.How S company follow the risk management method also be introduced in detail.This article focuses on explaining “Prevention is better than treatment " The concept of environmental risk management for a semiconductor company from emergency response moves to the prevention of "control",and according to the continuous innovation of the semiconductor itself,walking in the forefront of the industry characteristics,to use of the most advanced technology,transfer the risk assessment and the emergency response of the semiconductor industry from industry 3 to level 4,hope the paper will give some reference for the rapid and sustainable development for semiconductor manufacturing company.