Study On Quality Control Of B Highway Project Based On Third Party Inspection And Detection

Inspection and inspection plays an important role in highway project construction,and has an important impact on project quality management,cost control,construction progress and so on.In the process of highway project construction,construction units often neglect the importance of inspection and inspection in order to save the cost of site laboratory,speed up the construction progress.According to the construction of B highway project,this paper analyses the problems of quality management of B highway project based on third-party inspection and inspection.According to the problems existing in the quality control of B highway project inspection and inspection,this chapter will analyze the methods of inspection and inspection for quality control from three stages of pre-construction,mid-construction and post-construction.In the pre-construction stage,4M1 E quality analysis method will be used to analyze the influence of inspection and inspection on the quality of B highway project construction from five angles of "human,machine,material,method and ring".Control measures are put forward.In the mid-term of construction,the PDCA quality cycle analysis and quality control method will be used to standardize the key technical work in the process of inspection and inspection,such as the testing standards and requirements of raw materials,the design method of concrete mix ratio,etc.In the later stage of construction,the control measures will be analyzed from the angle of quality defect correction and prevention.Finally,the optimization quality management scheme of inspection and inspection is applied to the project construction to improve the specific work of inspection and inspection institutions in highway project construction and ensure the fairness and effectiveness of inspection and inspection data.On the premise of system construction,control of testing technical parameters,on-site inspection and acceptance of handover,the improvement scheme is put forward to provide quality for project construction.Quantity assurance,to achieve the regulatory role of inspection institutions,but also for construction enterprises to control costs,avoid risks,and create profits to provide support.By analyzing the quality control of highway project inspection and inspection,the scientific data basis is provided,and a scientific and feasible implementation plan is put forward for improving the quality of highway project.Improve the quality of the project,improve the status of inspection and inspection management.