Research And Design Of Group Control And Management System For Inner Tube Vulcanizer

In this paper,the group control and management of inner tube vulcanizing machine is studied and realized on the basis of systematic summary and careful summary of the development status of the vulcanizing machine group control and management.The research content of this paper mainly includes the following aspects:Firstly,the principle of the group control and management system of the inner tube vulcanizing machine is introduced.Through the analysis of the difference between the single control mode and the group control mode,the main realization methods of the group control and management system of the vulcanizing machine are put forward,and a specific group control scheme is established to achieve the purpose of centralized control and management of the single vulcanizing machine.Secondly,based on the original sulfide fleet of internal pressure temperature control principle and the working principle and steps of fuzzy PID controller,such as content analysis of discussion,the inner tube sulfide fleet of internal pressure steam temperature parameters in the production process of fuzzy PID control has carried on the simulation,to implement internal pressure temperature vulcanization fleet group automation intelligent manufacturing control laid a foundation.Thirdly,the whole system is built from both hardware and software.In the hardware work,according to the technological process of inner tube vulcanizing machine,the status and application of programmable controller,the status and application of touch screen,the electrical control system of vulcanizing machine is designed,the circuit system design scheme and system I/O design scheme and other overall control scheme are given,and the equipment selection suitable for the system is completed.In the aspect of software work,the software of group control system is designed,compiled and debugged.For various site problems,and puts forward the solution,completed the network the important parameters in the process of sulfide production automatic control,monitoring,data management and the design of the task of transmission,real-time reflecting all the machine equipment,production parameters,process parameters,such as timely alarm processing site,implementation of all management and integration of information system of the company.Finally,the feasibility and control effect of the control system are verified through many times of tests and trial production,a series of test conclusions are drawn,and the existing problems and the direction of improvement in the future work are summarized.