Research On Key Technology Of Overlength Label Servo Cold Glue Labeling Station

With the increasing level of production,the packaging industry is developing faster and faster.As a highly mechatronics complex product in the packaging industry,the highspeed cold-glue rotary labeling machine is very competitive in the fierce market competition.The demand for labeling machines is also increasing.At present,the development of highspeed cold glue rotary labeling machines suitable for short labels at home and abroad has been relatively mature,but the domestic research on overlength label cold glue rotary labeling machines is still blank,so this topic uses overlength label servo cold glue labeling station conducts research for the research object,the details are as follows:First,the working principle of the overlength label high-speed cold glue labeling station is studied.Based on the research of the working principle of the cold glue labeling station,the movement relationship between the label board and the rubber roller in the gluing work position is analyzed.The movement relationship between the label board and the label in the working position of picking label,the movement relationship between the label board and the label drum in the working position when removing the label,and the establishment of the three key stations of gluing,picking label and gripping label mathematical model.Secondly,the solution of the three-segment control curve of overlength label servo cold glue labeling station,and the generation of the transition curve between each station are completed.A set of control curves for the overlength label servo cold glue labeling station is obtained,which provides a theoretical model for the control curve of the servo continuous rotation overlength label labeling station.Based on the process characteristics of the overlength label cold glue labeling station again,the key process parameters and overall layout of the target plate arc length,radius,eccentricity,and radius of gyration of the target plate were determined.The prototype of the overlength label servo cold glue labeling station was developed.Finally,in order to verify the correctness of the theoretical model and prototype of the overlength label servo cold glue labeling station,the simulation verification of the prototype was completed on the ADAMS simulation platform,and the action of the label board the working process and the angular velocity time relationship of the target plate were analyzed.,Angular acceleration time relationship.This subject proposes a new technology for the overlength label servo cold glue labeling station,and designs a set of parameters and overall layout of the overlength label servo cold glue labeling station.It provides new ideas and methods for the design of labeling machines in the future,and has far-reaching engineering value.