Development Of Mable-Image-Carving Machine

The image-caving is a new craft which develops based on the Minnan tradition handicraft, its characteristic is using Mongolian, the Xinjiang black bluestone or Fujian Qingdou stone, Polishes firstly after the levitations amounts to above 80 degrees. Then the image outlined which must be carved as described in the flagstone, then uses alloy steel needle which specially makes to grind to resemble The drawing display in the spot displays, Light and shade based on the spots density, virtual or real changes, forms kind of lifelike picture. It can be preserved for a long time so that it is deeply welcomed as carving photos or portrait-image.Since the ancient times, China's image-carving on stones are all manually completed. This increases the labor intensity in a vast way, it cost high, the speed is slow, and moreover, the work has no possibility to duplication.This article elaborates the equipment image-carving machine specially which manufactures this kind of image to carve, It can replace the manual shade vulture in certain aspects, It can make the innumerable copies in theoretically of a picture, we just have to the complete artistic processing in the computer to primitive picture. Then put the data into the image-carving machine. All arranges will be completed by it. Greatly reduce the dependence to the operator. At the same time also reduced the labor intensity.This article study in details on the image-carving machine execution system, the actuation system and the transmission software carried. Discussing some key-questions details which appear in the design, and offer the design method Take this as the foundation, the author makes an image-carving machine actually. According to the actual test, it takes only less than one hour to finish the work identical with manual carves 3 day-long. Because it has realized the machine production, the only artificial work is to make the imagery processing in the computer and carry on some essential establishments, it reduced the labor intensity greatly. Because has the power failure protection function, therefore we can cut off the electricity to have a rest, then continue to work. Meanwhile with the image-carving machine the carving work no matter regards fromeffect or fidelity clarity looking of the work which manually carves is unable to compare. This machine is easy to operate, the structure simple and the cost is low. After finishing the movement the debugging is to be extremely stable it can achieve the practical level and steps onto the market.