Research On Technical Automatic Assembly Line System For Li/MnO₂ Button Batteries

This article refers to a design method of compatible automatic manufacture system, which is a method of orientation object and virtual sculpture based on axiomatic design theory. The research of technical automatic assembly line system for Li/MnO2 batteries relied on this method has gotten satisfactory effects and attained expected objective.Facing Li/MnO2 batteries 's characteristic that the battery are too many kinds , market changes quickly and the need of goods is large, the paper puts forward concept of the campatible automatic manufacture system, at the same time, it also mentions that only depending on the traditional design method is not able to meet the special need of system.For this reason, a kind of modern method must be found to resolve this problem.This method of orientation object and virtual sculpture based on axiomatic design theory is created under the background that has been refered above. This method requests as follows:Firstly function demand analysis of technical system must be done, and design parameter analysis of technical system must be accomplished based on related principles of axiomatic design theory, then the function demand and design parameters which have been formed are designed by coupling or no-coupling method and the macroscopic design parameters conformed to independent axiom can be obtained, according to these parameters many designs are mentioned, these designs are judged by means of information axiom, then the design containing the lest information and conformed to independent axiom can be obtained. After finishing the concept design of technical system, the technology of orientation object is used to concretely design the respective function module, through the foundation of system static structure model and dynamic behavior model, concrete design parameters are obtained, then according to these concrete parameters, virtual sculpture and virtual assembly can be done, dynamicly proofreaded and emulated, the proofreaded results are taken to the feedback of designsector, finally, not only reasonable but also optimalized design result can be attained.By means of this kind of design ,the article has detailedly introduced the project test of technical automatic assembly line system for Li/MnO2 batteries. The success of test sample machines put on the market has testified that this method is fit for the research of technical automatic assembly line system for Li/MnO2 batteries. Moreover, as the design method of mechanical electronic system, the article opines that this method generally fits for the design and research of campatible automatic manufacture system and has better extensibility.