Virtual Manufacture Technology Be Used In Agriculture Machine Design

Virtual Manufacturing is used more and more widely in our country, Virtual Manufacturing is a synthesized development and application of computer-simulation technology and virtual-reality technology. With VM, the actual manufacture can be realized essentially on computer. It is a new manufacture philosophy of enterprises based on information integrations. Virtual Manufacturing will be main stream of manufacture technology in future of our country.This article mainly introduced the hypothesized manufacture technology be applied in the suspend shelf of villatic supervisor machine. Development condition of Virtual Manufacturing technology in now society and some related application software are introduced, Such as Pro/E, Adams and so on. Application of countryside supervisor Machine and the development condition has made the introduction, and aimed at the existence question of present the suspend shelf of the countryside supervisor to make a thorough research.At present, the main question of the suspend shelf is the stability is not stable when it is working and lacked relevant accessory storeroom. Aimed at the above question, Pro/E, large-scale design software which collect CAD/CAM/CAE in one body is used to establish its initial model, and the family table of agriculture machine is established, to each part of the model, Meanwhile, twice exploitation to be carried on the gear of the gearbox, uses the structure analysis module, Pro/Mechanica, to carry on the stress analysis again, carries on the optimization in view of some stress concentrations weak links.Large-scale kinematics analyzing software Adams, to be used to carries on kinematics analysis on the suspend shelf, state of motion and be forced of each part of the model be simulated when it is moving, the basis be provided for further optimized and analysis.In brief, application of Virtual Manufacturing technology, make the establishment time , the success ratio and the performance of the product a great improvement, the cost is also reduced, and when the model is dissatisfied the required, as a result of the family table and twice developments of the gear of drive system, revised is also...