Research On Simulation Of Container Terminal Front Working System Based On Flexible Berthing

As the hub of transportation, port has become an important factor that can affect the national economy most. A good port cannot only save the investment but also can promote the development of social economy around it. And then, the design and the run of the wharf become the most important problem that need to be solved.Compared to the situation that the real capacity of container terminal is much more than the designed capacity, and the flexible berthing is found to be the most important reason that caused this case. Based on the analysis of the container terminal, a new system model with considering flexible berthing issue was established with some simulation of recent material which could be the basis of the design and circulating.Firstly the article depict the developing trend of dock construction in the influence of world commerce and high developing speed of ship, summing up analysis modeling methodology and appliance of simulation system which has already exist, and then point out some defect. Then the article analysis the main characteristic of the container terminal, flexible berthing is the most important fact that caused situation above. And the effect caused by flexible berthing on container terminal is introduced. Based on the conditions above, VC++ and Witness simulation software are used to be solve the simulation of the container terminal under flexible berthing. The model established is verified by Dalian Container Terminal which can be researched deeply into the shoreline utilization that flexible caused. Via the result in this article, the system model is worth to applying in the real proceeding, and is good enough to assist the design and management. The research basically reaches the anticipation.