Dissertation For The Master Degree Of MBA

This dissertation is written under the background of automotive industrial quickly grow。If the manufacturer who make the automotive component want become vendor of automotive manufacture,the company must be get TS16949 certification first。First of all,author quickly introduce how the TS16949 was generated and the relationship of TS16949 quality management system with others quality management system。Per evaluation and analysis of JB company's quality system and JB company status,author explain how important for JB company to run TS16949 quality management system。Second,though case of JB company prepare and set up TS16949 quality management system to show how to use octopus to define process and how to use turtle to analysis what is input ,out put of each process,who is owner of process and how to evaluate each process owner's performance。Third,Per JB company's case to show how to run TS16949 quality management system in JB。When the new project comes into JB,JB uses Advanced Product Quality planning and Control Plan (APQP) to make sure product's quality and reliability。APQP emphasize that how to prevent quality issue happen。APQP of JB has four phases。Author uses case to explain the work of each phase。In Process reach and development phase,the article emphasis introduces how to use Potential Failure Mode and affects Analysis (PFMEA) to prevent process cause failure of product。In validation of product and process phase,author introduces how to use Measurement Systems Analysis (MSA),statistical Process Control (SPC),Production Part Approval Process (PPAP) to insure the quality of product and stable of the Process。To analysis what achievement and shot point JB company has. Per JB's experience, author show how better to do quality mange in company.