At present, in our country the wide application of external thermal insulation system of exterior wall insulation, mainly within the external wall insulation, wall insulation from the three. The integration of thermal insulation and decoration plate refers to the external wall thermal insulation system required in the insulation resistance, decoration and other functions as one of the new prefabricated plate. This paper follows the external wall thermal insulation technology of national standard, local and industry on the basis of the provisions, material analysis, testing and other means of integration of thermal insulation and decoration plate design, and the factory machinery prefabricating production, on-site construction technology and other aspects of the work to study, is helpful to improve the insulation product standardization, industrial production, construction of buildings assembly of integral level, to achieve good performance of insulation, building exterior wall facing beautiful diversity, shorten construction time limit for a project and target.In external wall insulation system requirements are put forward on the basis of the integration of thermal insulation and decoration plate structure design theory and method:in accordance with the insulation principle on EPS, XPS, polyurethane materials performance testing contrast to determine thermal insulation material, according to industry standard" hot summer and cold winter zone residential building energy efficiency design standards" thermal calculation to determine the thermal insulation material thickness; through material analysis of reasonable selection of materials of the protective layer and the detection of protective layer material and the basic performance; the preparation of excellent performance, attractive and elegant stone decorative materials; according to the integration of thermal insulation and decoration materials developed a unique set of mechanized production parameters, to establish the mechanized production line and production process should pay attention to matters; explore and finishing wall external thermal insulation system construction site installation detail node processing, the whole assembly construction technology and related acceptance criteria. |