Design Of Intelligent Street Lamp System Based On Wireless Communication Technology

As a city road lighting system,urban street lighting not only plays an important role in urban lighting engineering.And also plays a very important role in urban public safety and traffic safety.With the continuous development of urban lighting engineering technology,the problems of traditional street lamp and management system are very obvious.This paper mainly describes the ZigBee wireless networking technology and the principle of microwave Doppler radar.An intelligent street lamp system based on ZigBee is designed.The intelligent street lamp control system has the function of wireless remote communication and can monitor the working state of street lamp in real time.When the street lights come out,In case of failure,the system can report information in time so that maintenance work can be carried out in time.The control system can adjust the lighting brightness of street lights by detecting whether there are vehicles and pedestrians,and implement full load lighting when the traffic flow is dense in rush hour,and reduce the lighting load in the case of low traffic flow and low passenger flow in the late night.If the intelligent streetlight control system is applied,it can save energy under the premise of providing reasonable lighting,and can effectively reduce the cost of labor in the maintenance process,which has certain economic and social benefits.For traditional street lamp lighting system,intelligent street lamp control system By using wireless communication technology,the investment of funds can be reduced in the process of transformation and upgrading,which has good feasibility and maneuverability.Intelligent streetlamp control system,which has advantages in energy utilization,has a good market prospect in promoting energy saving and environmental protection green economy.