Research Of Product Ergonomics Form Design

Design theory and design objects are two important aspects of Engineering Product Design research. Studying on technical system and its design theory is relatively comprehensive and mature. However, the influence of traditional design method "Focus on function" is wide and deep. Because the factors of human and operational environment are not considered systematically, the design concept of "design focus on human" is not concerned fully When design technical system.Product ergonomics form design has been discussed in this thesis. By concerning about the relationship between product and ergonomics, it has been studied that the basic theory of ergonomics, statistical analysis for anthropometry, and design method of product form. The method of product form design based on ergonomics has been studied, and an approach to fulfill product form design has been put forward.The main contents and results of this thesis are listed as follows.(1) To construct product ergonomics form need lots of essential data from the ergonomics parameter. Based upon the National Standard (NS) GB10000—1988 and GB/T 13547—1992, It have been analyzed that the ergonomics parameters. The body's structure and functional size, the application of the ergonomics parameters has been discussed. Based on organ correlation theory and NS dimension, the body's ergonomics parameters have been analyzed with linear regression and the normal distribution functions of body's ergonomics parameters has been established. A method to setup derivative body dimension has been given out.