Design And Research Trailed Sprayer Equipment Off The Dust

Dust is a flammable and explosive tiny particles, and people long-term inhalation can cause great impact on health. Spray dust is the most economical and effective measures at home and abroad, But only can achieve the one droplet atomization. By dusting spray mechanism theory, the use of wind sent spray principle, can achieve secondary atomization of the droplet, For spray equipment exists does not move freely and the power source to provide electrical phenomena, to design a power source provided by the traction device mobile spray dust suppression equipment, thought raising the water atomized ability can increase under the condition of the same amount of water mist in the air distribution density, enhance the ability of collisions with dust. To improve the dust removal performance of spray equipment, this can meet the requirements of the dust in the work place such as industrial and mining enterprises.Analysis and research the status of the spray dust equipment at home and abroad, according to dusting spray atomization mechanism and theory to design a new type of spray dust extinguishing equipment,Spray nozzle is a key component affecting spray equipment, Due to the current phenomenon on clogged nozzles easily and low spray effect phenomenon, On the nozzle of the spiral structure of internal improvements, and improved detachable nozzle structure, can reduce spray nozzle clogging and improve effectiveness. Main frame is the key components, Therefore, while making reasonable use Proe design three-dimensional modeling and finite element analysis by ANSYS, Strengthening treatment to improve the use of the safe use of the vehicle at the weak pointAir duct is a key component to achieve secondary atomization spray equipment capacity, by using FLUENT software to analyze the flow field, By increasing the air flow inside the control unit of the wind tunnel to optimize the structure and improve the ability of secondary atomization spray equipment.