Substation automatization system often uses communication controller to carry out communication with field computer and remote computer. Anti-interference ability of traditional design is usually on ISA or PCI bus, it is not good, and it' s installation is not simple. Now USB is applied abroadly because it has merits of simple installation, good anti_interference , etc. This design was on USB bus, made use of merits of CAN and USB, furthermore many measures had been taken to guarantee the communication reliability. IEC 60870-5-101 protocol is adopted in communication between field computer and remote computer.This article firstly expounded communication controller' s application environment in substation automatization system. Secondly it particularly recommend CAN' s and USB' s protocol and comment. This article combined controller' s hardware design , and explained how to select chip and explained chip' s function. Furthermore this article analysis controller' s software and work principle. And it simply explained WDM' s USB drivers. Lastly, it explained Anti-interference measure.
|