Welding Total Quality Management System Research And Implement

To deal with the challenge of competition between enterprises nowadays, quality is turning to a strategy weapon for the firm to survive in the market. In welding field, the products with quality defect will threaten the safety and life of people, such as bridge, pressure vessel, and ship and so on, so the enterprises are very care about welding quality management. Due to the welding are special processing method, people set up a lot of standard to measure the quality. For example, AWS standard in U.S.A. and EN (ISO) standard in Europe.Based on the international standard and requirement of total quality management, we set up the frame for welding total quality management. It was defined in the paper for the responsibility and function of four departments cooperates tightly to improve the welding quality according to ISO 9000 standard. Then, it was described how to control and improve the quality during welding process quality management centered by customer satisfaction: Technically control the welding quality according to ISO 3834, improve the quality level by continuous improvement. At last, there is some conclusion about the difference of welding total quality management implement with other system and some problem should be taken into consideration. Especially, the organization supported from down to up and performance appraisal and motivation system are affect executive of quality management are highlighted. At same time, to finalize the welding total quality management system, setting up the quality info system from supplier and after sales service quality management will be better feedback for whole structure.Hopefully this researching will be a good supplement for welding quality management, and also to be lucky for our enterprise to get some point from here during international competition.